Easy-to-install Gas and Fume detection unit that sounds analarm before the possibility of an explosion
The BEP Gas Detector sounds off a warningalarm if there is an LPG or Gas leakage on board your boat or motorhome. The sensor is mounted in the front face making it aneasy-to-install all in one stand alone unit. Its designed to besurface mounted at the lowest point in the vehicle where fumesaccumulate first. The detector is equipped with a test button and asensor status light.
BEP Gas Detector Specifications:
- Model number: 600-GDRV
- Power Supply: 10-32VDC
- Alarm Sensitivity: 20% LEL (Lower explosive limit)
- Current Draw: 70mA (milliamps)
- Built in sensor
Note: Wiring sold separately. If the sensor gets wet then the sensor becomes inoperable and must be replaced.
For LPG and Petrol fumes: These gases are heavier than air, mount the sensor in a low dry position where the gas is likely to be. The sensor must be mounted clear of bilge water.
For CNG:This gas is lighter than air, mount the unit just below ceiling height but not above cooking or heating appliances.
